3. Installation and Wiring
3-1
Chapter 3 – Installation and Wiring
3.1 Caution on Installation
3.1.1 Do not install the inverter in a location where excessive vibration is present.
Be cautious when installing on presses or moving equipment.
3.1.2 Caution on ambient temperature
Ambient temperature greatly affects inverter lifetime, therefore be sure to keep the ambient
temperature of installation location at –10 to 40℃.
3.1.3 Install the inverter on the uninflammable material. The inverter operates at high-
temperature.
3.1.4 Avoid a humid and hot location.
3.1.5 Install the inverter in a location free of oil mist and dust.
Totally enclosed panel can be used to protect the inverter against that materials.
Measurement point of
Ambient temperature
5 cm
5 cm
5 cm
SV-iV5
This chapter describes general items for the installation and wiring of an
inverter and includes instruction for wiring to power terminal and control one
and caution in case of wiring, and also explains the function of each terminal
for both power and control.
To Next Page
Loading...
Need help?
General
