Page 144
REPAIR INSTRUCTIONS, PART 1
2. Bar the engine over to align a hole in the
adjustable idler gear with one of the two
hidden screws that are through the plate into
the cylinder head. Remove the screw.
182
Figure 182 — Hidden Screws
3. Bar the engine over to align a hole with the
remaining hidden screw behind the
adjustable idler gear. Remove the screw.
4. Remove the three upper screws in the
adjustable idler gear hub.
183
Figure 183 — Upper Three Adjustable Idler Gear Hub
Screws
A. Location of Screws Behind Idler Gear
A. Remove these screws.
To Next Page
Loading...
