Page 324
SPECIFICATIONS
EGR Cooler Assembly
459
Figure 459 — EGR Cooler Assembly
1. EGR Valve
2. Cooler Inlet (Hot Pipe)
3. EGR Cooler
4. Cooler Mounting Brackets
5. Crossover Pipe
EGR Valve Attaching Screws Step 1. 20 ±4 N•m (15 ±3 lb-ft)
Step 2. 48 ±8 N•m (35 ±6 lb-ft)
EGR Cooler Inlet Pipe (Hot Pipe) V-band Clamps 20 ±4 N•m (15 ±3 lb-ft)
EGR Cooler Attaching T-bolts and Locknuts 12 ±2 N•m (9 ±1 lb-ft)
EGR Cooler Outlet Coupling Hose Clamps (note lb-in) 7 ±1 N•m (62 ±9 lb-in)
EGR Cooler Drain Valve Fitting 15 ±3 N•m (11 ±2 lb-ft)
EGR Cooler Drain Valve Closing Torque (note lb-in) 3 ±1 N•m (27 ±4 lb-in)
To Next Page
Loading...
