Manitowoc GROVE GMK 3060 - Page 174

Maintenance work on the carrier
7.13 Hydraulic system
7 - 100 3 302 574 en Maintenance manual
GMK3060
03.11.2017
Changing oil
filter 4
• Release the receptacle (1) at the hexagon
head.
• Change the filter (2).
• Replace the gaskets.
• Screw the receptacle on.
• Start the engine and check for leaks.
Changing oil
filter 3
• Release the receptacle (1) at the hexagon
head.
• Change the filter (2).
• Replace the gaskets.
• Fill the receptacle with clean oil and tighten
it – torque 25 Nm (18.5 lbf ft).
After changing
• Restore the operating condition; à Establishing the operating conditions,
p. 7 - 96.
• Start the engine and check the oil filters for leaks.