Run-in regulations
4 - 2 3 302 574 en Maintenance manual
GMK3060
03.11.2017
Operating hours
(oper. hrs.)
Additional maintenance work on the
SUPERSTRUCTURE
during the first 100
Check hydraulic oil filter 3 in the
superstructure every week, and change it if
necessary;
à Changing oil filter 3, p. 7 - 100.
after 100 Tighten the bolts on the slewing bearing;
à Checking the bolts, p. 8 - 23,
à Special torques, p. 10 - 2.
after 100 Hook blocks;
à Greasing, p. 8 - 65.
after 200 First oil change on the hoists;
à Changing the oil/checking the oil, p. 8 - 12.
after 1,000 or after
12 months at the latest
Second oil change on the hoists;
à Changing the oil/checking the oil, p. 8 - 12.
after 200 Change the slewing gear oil;
à Changing the oil/checking the oil – Slewing
gear transmission
, p. 8 - 19,
à Changing the oil/checking the oil – Slewing
gear brake
, p. 8 - 21.
To Next Page
Loading...
Need help?
General
