Installation and User Manual
12
2.1.5
General information
2.1.5.1 Operator's position
The P3UP is designed and constructed to interlock with a machine, of which it becomes to all intents and
purposes, a sub-assembly.
Therefore refer to the final machine that the P3UP will be installed in for the operator’s position during all the
various operation processes, in particular during production and maintenance.
2.1.5.2 Operator's tasks
The operator assigned to the installation must:
1. lift, transport and store the P3UP
;
2. assemble and adjust the P3UP;
3. remove the P3UP.
The operator’s tasks during normal work:
• No operator interventions are required while the P3UP is operating: For more information see the final
machine’s manual.
The operator assigned to the maintenance must:
1. perform routine maintenance;
2. perform extraordinary maintenance;
3. signal unexpected situations (e.g. wear, failures, breakages, errors, etc.) not set out in this
document and therefore generated by unforeseen causes.
To Next Page
Loading...
