marposs P3UP - 3.2 Packing, Movement, and Transport; 3.3 Storage

Installation and User Manual
17
3.2 Packing, movement, transport
3.2.1 Packing
The P3UP is protected with carton and an internal insert for the movement and transport operations.
3.2.2 Moving the package
The package can be lifted manually as set out by the general health and safety standards in the work place
for manually moving loads, especially when lifting a load from the ground.
3.2.3 Transporting the package
The package containing the P3UP must be transported with covered transport equipment to prevent
exposing the package and the P3UP to atmospheric agents.
3.2.4 Disposing of the packing material
The packaging used for the P3UP consists of materials that are not dangerous, in terms of disposal, for
people, animals or materials.
The operators assigned to disposal must bear in mind that the packaging consists of:
• Carton: external container and internal insert
• Polyurethane film: internal insert.
DANGER FOR THE ENVIRONMENT
The polyurethane film is NOT biodegradable. Do not dispose of
it in the surrounding
environment: recycle and/or dispose in compliance with the applicable standards in the
destination country.
3.3 Storage
3.3.1 General Information
The mechanical and electronic components installed in the P3UP have been selected based on their
reliability and resistance. The components comply with the applicable construction requirements in terms of
safety and have been designed to support transport and storage temperatures between -20 °C and +60 °C (-
4° F
÷
140° F).
3.3.2 Storing the P3UP
The P3UP must be stored in covered premises with limited exposure to dust and humidity.
The warehouse flooring must be horizontal and free of irregularities.
Do not position other materials, even light items, on top of the P3UP package or the P3UP itself, in order to
avoid damaging it.