marposs P3UP - Testing, Warranty, and Support; Consultation Method and Symbols

Installation and User Manual
8
1.4 Testing and warranty
Material defects are covered by the warranty with the following limitations:
• GUARANTEE PERIOD: the warranty covers the product and all repairs carried out within the standard
warranty terms.
• SUBJECT OF THE GUARANTEE: the warranty applies to the product and its parts marked with the
serial number or other identification number used by Marposs.
The above warranty applies unless other agreements are reached between Marposs and the Customer.
1.5 Requesting technical support and maintenance
In case of failures or faults that require the intervention of Marposs personnel contact your closest technical
support centre (listed at: http://www.marposs.com/worldwide_addresses.php/eng
).
1.6 Instructions for ordering spare parts
To order spare parts please contact your closest Marposs centre (listed at:
http://www.marposs.com/worldwide_addresses.php/eng
).
1.7 Consultation method
The manual uses a specific typographical method. Various safety warnings have been defined.
1.7.1 Key to symbols
WARNING
This warning indicates the possibility of damage to the electronic unit and for other devices that
it is connected to, or the possibility of losing data.
ATTENTION
This warning indicates conditions of risk for the operator or the technician.
ELECTRIC SHOCK RISK
Electric shock hazards
may be present when carrying out fault finding routines on live
components.
FIRE OR EXPLOSION RISK
The P3UP cannot be used in location with the risk of explosion and/or fire (the P3UP
is not
certified pursuant to directive 94/9/EC ATEX).
DANGER OF CRUSHING
Proceed with caution when moving or handling the P3UP.
DANGER FOR THE ENVIRONMENT
Recycle and/or dispose pursuant to the applicable standards in the destination country.
NO SMOKING
Smoking is prohibited while installing the unit.
[
N.B.
Information that can make it easier to use and understand the system is enclosed in a text
frame, indicated by “N.B.” in bold.
i
INFORMATION
Information about the correct use of the machinery.
THE FINAL MACHINE DOCUMENTATION MUST BE READ
in order to ensure that the machinery is operated correctly.