Installation and User Manual
9
WARNING – Area protected against ESD.
Observe the procedures for handling devices that are sensitive to electro-static discharges
1.8
Identification plates
The identification plate is positioned on the rear of the P3UP:
the plate indicates the Marposs product identification code (MODEL), the serial number (SERIAL No.) of the
individual P3upand the CE marking.
Warnings:
a) Never remove the plate from the original position selected by Marposs;
b) do not modify or alter any of the technical details indicates on it;
c) do not clean the plate with sharp objects (e.g.: iron brushes), which may make the data illegible.
d) When requesting technical assistance, always quote the data indicated on the plate
[
N.B.
All the data listed on the plate must always be legible.
If a data plate is damaged or even partially illegible due to wear, ask MARPOSS for another one,
quoting the data in these instructions or on the original data plate.
.
To Next Page
Loading...
Need help?
General
