MLA System USER GUIDE
MLA System User Guide V2.1 360
The MLA array shows the input bargraph plus all Cell output bargraphs for all cabinets in the array, all other arrays and speakers
show input and output levels and all Merlins display input and output meters. All bargraphs are updated in real time which makes
monitoring an entire system very easy from a single page.
In addition to monitoring the meter response, essential features are accessible. The function control is the same for all Array and
speaker types;-
The top line shows the input configuration for the array, if this needs to be changed clicking on the top line takes you to the array
input overview screen where you can change the input configuration. If the array isn't already open it will be opened by clicking
on this button.
On the second row is GAIN. Gain adjustments can be made by clicking on this button. A pop out fader appears which can be
adjusted in real time, either by dragging and dropping the fader knob until the desired gain value is displayed,
To Next Page
Loading...
Need help?
General
