MLA System USER GUIDE
MLA System User Guide V2.1 415
Do NOT plug the second cabinet in yet as it will get in the way of rigging the next cabinet.
The first U-Net cable connects to the left hand U-net port on the first (top) MLA cabinet. Audio goes into the female XLR on the
top MLA just above the U-Net port;-
Assuming you have connected the U-Net cables to the Control rack and powered the rack you will see the cabinet power up. The
amp module fans will briefly come on a full speed to clear and accumulated dust, the LED logo badge will illuminate for a few
seconds and the power LED will light red. If your network connection is OK you will see the U-Net LED light green. If it is flashing
or red or doesn’t illuminate at all you have network issues which need to be resolved, see the troubleshooting guide for details.
To Next Page
Loading...
