MLA System USER GUIDE
MLA System User Guide V2.1 416
The second U-Net cable in the loom will go to the second U-Net port in the final cabinet in the array to enable the close-loop
topology. For now it can be left hanging loose.
Connect the inclinometer cable to the inclinometer sensor on the side of the grid;-
Connect one of the 800mm AES XLR cables and an 800mm U-Net cable (usually loomed together) from the audio out and U-
Net port 2 on the top MLA cabinet down to the Audio input and U-Net port 1 on the second cabinet;-
To Next Page
Loading...
