MLA System USER GUIDE
MLA System User Guide V2.1 430
The flown subs are then lowered on top of the rear facing sub and connected front and rear in the usual way. The rigging brackets
are identical front and back to make this possible. Now fly the array again keeping it well above head height. Now bring the next
MLX over and again lower it flat under the array but facing forwards. Next you need to lay a 2.5m Ceeform extension cable (part
number PWA00053), and two 3m link looms one facing in one direction and the second in the opposite direction, all in the central
channel down the middle of the top of the cabinet;-
To Next Page
Loading...
