MLA System USER GUIDE
MLA System User Guide V2.1 431
Now bring the flown cabinet in and land hem carefully on top of the sub on the ground. Once in place make sure that the cables
in the centre channel move freely, if they won’t move they are probably trapped under the upper cabinets. Fly them out a short
distance and re-position the cables before bringing the array back down and trying again. Once positioned, link the sub front and
back in the usual way and then make the connections at the front of the array to the rear facing sub which of course has its rear
panel at the front of the array. Raise the lower panel to make the connections;-
To Next Page
Loading...
Need help?
General
