2
WARNING: Any warranties for modified operation
units (safety frame, electric and hydraulic systems
a.s.o) expire if cabs are mounted that are not ap-
proved by the tractor's maker. Moreover, noise levels
and compliance with the approvals cannot be veri-
fied in this case.
CALIFORNIA
Statement 65
Warning
Diesel engine exhaust and some of its constitu-
ents are known to the State of California to
cause cancer, birth defects, and other repro-
ductive harm.
Units Of Measurement
Allunitsofmeasurementusedinthismanualaremetric
unlessotherwisestated.
Usethefollowingtabletoconvertfrommetrictoimpe-
rialunits.
mmx0.03937=inches
kgx2.2=pounds
Barx14.5038=PSI
Litresx0.22=Britishgallons
Litresx0.264=USgallons
N(Newton)x0.225=pound/foot
Nmx0.738=pound/foot
Nmx8.85=pound/inch
°Cx1.8(=32)=°F
km/hx0.62=MPH
This manual was compiled in compliance with the the ISO 3600 standards and the here contained instructions
comply the requirements of the Machinery Directive 2006/42/EC and Directive 2010/52/EC in force in the Euro-
pean Community. For tractors sold or used outside the European Community, local laws will prevail.
Main protections on the tractors discussed in this manual. [4.1.o][4.1.p][4.1.q][4.5.b][4.5.c][4.5.3]
CAB DELUXE
ROPS(protectionagainstoverturning) YES
FOPS(protectionagainstobjectsfallingfromabove) YES
OPS(protectionagainstpenetrationofobjectsfromsides) NO
Protectionagainsthazardouschemicals CLASS1*
This operation and service manual is valid for all countries and all models. It contains photos, notes and
directions both for standard and optional equipment. Therefore it can give details for parts not installed on
your tractor with respect to the local laws in force and according to ordered optional equipment.
The tractor is supplied complete with safety devices according to national or international laws. For your
own safety, please always use correctly such devices and check them for function. If you have any doubts con-
cerning their operation or use, do not hesitate to ask your Dealer for details.
* In compliance with EN 15695-1:2009