MCCORMICK X60 Series - Page 76

76
Instruments and Programming
List of controllers
Controller Designation
InstrumentCluster   IC
PTO/Hitch   Ehr
TransmissionController   tc
Thefollowingunits,onlyifmountedonthetractor
Engine(ifelectronicengine)   Eng
Onlywithmountedmechanicaltransmission:
PTOcontrol  PTO
-IftheMENUbuttonispressedagainforlessthan2secondsthethirdlevelofmenuwillbeselected.Thisdisplaysthe
errorcodesfromtheselectedcontroller.
 ThecontrollernameismovedtothepartoftheLCDwhichusuallydisplaystheclockandtheSPNs/FMIsareshown
belowit.
-PressingtheUPandDOWNbuttonswillscrollthroughalltheerrorcodesfortheparticularcontroller.
-IftheMENUbuttonispressedagainforlessthan2secondstheoperatormayselectadifferentmodulebyscrolling
uptolevel1.
-ToexittheErrormenu,theoperatorhastopresstheMENUbuttonforlongerthan2seconds.Thiswillexittothefirst
levelwheretherestoftheworkingmenucanbeaccessed.
WARNING: When an operation ERROR is displayed, ask
the Dealer's specilized personnel for help indicating
the error code. The Dealer's personnel has specific
competences to locate the error and the type of opera-
tion to be performed.
IntheexamplebelowtheEnginehas4errors: