AlgoMed Technical Reference Manual
Proprietary 103 of 110
15. Appendix D – Cleaning and Disinfecting
Perform this procedure before initially using the Algometer and after each use, to minimize the
spread of pathogens between tested subjects.
1. Thoroughly clean the Algometer contact surface using a cloth wetted in Alcohol 70%.
2. Rinse off any residual OPA by wiping three times with three different cloths wetted with tap
water.
3. Allow to air-dry.
4. Store the Algometer in a clean, dry area.
5. Before each patient wrap the Algomed tip with standard disposable biocompatible finger cot