AlgoMed Technical Reference Manual
Proprietary 90 of 110
test screen and gage. Units depend in current user
settings.
Pressure Rate
configuration
Default pressure rate display (min, max) for Algometer
gage. Units depend on current user settings.
10.3.2 Instructions Configuration
The Instructions Configuration option sets the default text and audio instructions according to
test method. These instructions will be associated by default to each new program created
based on the test method. To configure custom instructions for a specific program (refer to
section 2).
Figure 57: Instructions Configuration
Test instructions are available in the following formats:
Text – written instructions.
Audio – vocal recording which will be played out to the patient. Supported file formats
are: wav, wma or mp3.
10.3.2.1 Text
To create written instructions for a test method:
1. Choose the desired test method for example AlgoMed-Limits.
2. Click the Text button.
The following screen is displayed:
To Next Page
Loading...
Need help?
General