AlgoMed Technical Reference Manual
Proprietary 30 of 110
Password: admin
1.2. The available connections depend on your license agreement and purchased
devices.
Not Connected – software will start without connecting to any device
AlgoMed – software will establish communication with AlgoMed.
Initial login Username and Password are both admin.
For more information on user management please refer to section 10.1.6
Figure 9: Login Screen
2. Software will attempt to establish communication with AlgoMed system.
the following screen is than displayed while the software is loading:
Figure 10: Welcome Screen
4. The software will check user authentication and start with TEST mode screen.
5. If communication was established successfully continue to section 5.4, page 32. Otherwise,
if you selected Not Connected continue to the next section in order to manually connect
the AlgoMed.
To Next Page
Loading...
Need help?
General