EasyManuals Logo
Home>Medoc>Measuring Instruments>AlgoMed

Medoc AlgoMed User Manual

Default Icon
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
AlgoMed Technical Reference Manual
Proprietary 26 of 110
Depending on the current configuration of the computer, MEDOC Main
Station installer may require the installation of additional components. The
installation procedure may take several minutes.
Software installation can be performed only by Windows System
Administrators only
Disable any antivirus that runs on the PC before installing Medoc Main
Station.
The following instructions will guide you through the installation procedure:
1. Insert the USB drive into an available USB port on the computer
2. Open the folder to view files.
3. Double-click Setup.exe to start software installation
4. Click Next to continue the installation.
5. Select the file location where Medoc Main Station should be installed. You can use the
location recommended by the installation. Click Next to continue.
6. Select the location of the Medoc Main Station shortcuts in the start menu. You can use the
location recommended by the installation. Click Next to continue.
7. Installing normative data please read the agreement carefully. If you agree to the term
please choose to install normative data. Click Next to continue.
8. Privacy please read the terms carefully. If you agree please choose to allow data
collection. You may cancel this option any time later if you choose to.
9. The installation is now in progress. Depending on your computer configuration it may take
up to several minutes.
10. After installation has completed, click Finish to close the wizard.
11. Restart your Computer.
12. Medoc Main Station software is now ready to be used.
4.6 Unit Protection
Keep all liquids away from the AlgoMed system.
Turn off the AlgoMed device if it is not to be used for a long period of
time.
When all setup and installation procedures have been completed you can
start using the system in accordance with the operation instructions in
section 5
4.7 Product Activation
When starting Medoc Main Station software for the first time, you will be asked to register your
new system and activate the software. Product registration and software activation is simple
and fast and it will enable you to maintain full use of Medoc Main Station software as well as:
Warranty on your newly purchased Medoc systems

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Medoc AlgoMed and is the answer not in the manual?

Medoc AlgoMed Specifications

General IconGeneral
BrandMedoc
ModelAlgoMed
CategoryMeasuring Instruments
LanguageEnglish