Medoc AlgoMed User Manual

AlgoMed Technical Reference Manual
Proprietary 15 of 110
6V from 0.15 to
80MHz and 80%
AM
at 1kHz
10V/m from
80MHz
to 2.7GHz
6V from
0.15 to
80MHz and
80% AM
at 1kHz
10V/m from
80MHz
to 2.7GHz
where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in metres (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,
should be less than the
compliance level in each
frequency range.
D Interference may occur in the
vicinity of equipment marked with
the following symbol:
Declaration – electromagnetic emissions
Emissions
test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group1 Class A
The Algomed uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
Harmonic
emissions
IEC
61000-3-2
Class A
The Algomed is suitable for use in all establishments
other than domestic, and may be used in domestic
establishments and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes, provided the
following warning is heeded: Warning: This
equipment/system is intended for use by healthcare
professionals only. This equipment/ system may cause
radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take
mitigation measures, such as re-orienting or relocating
the Algomed or shielding the location.
Voltage
Fluctuations
And Flicker
IEC 61000-3-
3:2013
Complies

Medoc AlgoMed Specifications

General

Brand	Medoc
Model	AlgoMed
Category	Measuring Instruments
Language	English