3
1 - Introduction
Indicates separate collection for electrical and electronic equip-
ment per directive 2002/96/EEC.
The Intego™ PET Infusion System is a Class 1 electrical device as
determined by IEC 60601-1.
Radiopharmaceutical (
18
F-FDG or
18
F-NaF).
Stop button.
On/Shutdown/Standby button.
Applied parts rating. The infusion system is a BF applied part
device as determined by IEC 60601-1, indicating the degree of
protection against electric shock.
Fuse rating. See Intego address label for specific fuse rating infor-
mation.
This symbol informs the user of the correct manner of use.
This symbol informs the user of the incorrect manner of use.
Label showing the correct and incorrect routing of the Source
Administration Sets (SAS) through the Saline Pump.
Label showing the correct and incorrect insertion of the Saline
Spike into the Saline Container.
Label showing the correct and incorrect routing of the tubing
through the RP Pump.
To Next Page
Loading...
