Your COMAND equipment
i
These operating instructions describe all
the standard and optional equipment of
your COMAND system, as available at the
time of going to print. Country-specific dif-
ferences are possible. Bear in mind that
your vehicle may not feature all functions
described here. This also applies to safety-
relevant systems and functions.
i
Read the information on qualified special-
ist workshops in the vehicle Operator's
Manual.
Sound settings
Calling up the sound menu
You can make various sound settings for the
different audio and video sources. It is possi-
ble to set more bass for radio mode than for
CD audio mode, for example. The respective
sound menu can be called up from the menu
of the desired mode.
X
Switch to radio mode (Y page 166).
or
X
Switch to media mode (Y page 178).
X
To switch to the menu bar: slide 6 the
controller.
X
To select à: turn and press the control-
ler.
The menu appears with the last setting
accessed, e.g. Equalizer
.
Sound menu overview
Function Options
Equalizer Sets treble, mid-
range and bass
Balance/fader Moves the sound
focus: left/right and
front/rear
Setting treble, mid-range and bass
X
Call up the sound menu (Y page 208).
X
Turn the controller until Equalizer is
brought to the front.
X
To activate rotary menus for treble, mid-
range and bass: slide 6 the controller.
X
To switch between the rotary menus: slide
8 or 9 the controller.
X
To make the desired Equalizer settings:
turn the controller.
Rotary menus show the set values.
X
To return to the menu: slide 5 the con-
troller.
X
To return to the basic menu: press the %
button briefly.
Adjusting the balance/fader
Balance moves the focus of the sound
between left and right.
Fader moves the focus of the sound between
front and rear.
208
Sound settings
Sound
To Next Page
Loading...
