Mercedes-Benz 2016 Command - Recording the Route

X
Set the map scale (Y page 96).
X
To switch to the menu: press the % but-
ton.
X
To call the personal POI: turn and press
the controller to select Call
.
If a mobile phone is connected to COMAND
and the telephone number is available, the
call is connected (
Y page 118).
X
To save a personal POI: turn and press the
controller to select Save
.
X
To continue saving (Y page 94).
X
To edit the name and symbol: turn and
press the controller to select Edit
.
X
Select Change Name or Edit Icon.
X
Character entry (Y page 31).
X
Select a symbol.
X
To delete a personal POI or route: turn
and press the controller to select Delete
.
A prompt will appear.
X
Select Yes or No.
If you select Yes
, the personal destination
or personal route is deleted.
X
To select the outward and return
routes: turn and press the controller to
select Swap
.
The starting and destination positions of
your personal route, and thus the direction
for route guidance, are switched round.
One-way streets or restricted intersections
are taken into consideration. Therefore, the
outward and return routes may differ from
each other.
X
To start route guidance: turn and press
the controller to select Start
.
Recording the route
General notes
Routes are recorded on the SD memory card.
Requirement: the SD memory card is format-
ted using the FAT file system (e.g. FAT32).
When recording the route, bear in mind the
following:
R
if the SD memory card is inserted, it must
not be removed during recording.
R
if route recording is started manually, it
must be finished manually before COMAND
is switched off (e.g. when the engine is
switched off).
R
COMAND minimizes the number of route
points recorded. Therefore when the recor-
ded route is subsequently commenced, it
may differ from the route that was originally
recorded.
Starting/finishing route recording
X
Insert the SD memory card (Y page 182).
X
To switch to navigation mode: press the
ß button.
X
To show the menu: slide 6 the control-
ler.
X
To select Destination, turn and press the
controller.
X
Select From Memory Card.
X
Select Start Route Recording.
The route is recorded and REC appears at
the bottom edge of the screen.
X
To stop recording, select End Route
Recording from the menu.
The route is stored under Personal
Routes.
Displaying/editing the recorded route
X
Insert the SD memory card (Y page 182).
X
To switch to navigation mode: press the
ß button.
X
To show the menu: slide 6 the control-
ler.
X
To select Destination: turn and press the
controller.
X
Select From Memory Card.
Personal POIs and routes
83
Navigation
Z