Setting off-road program
X
To switch the off-road program on: press
the
button.
A window appears after a short while.
X
To confirm Adjust: press the controller.
The Offroad Settings
menu appears.
X
To select SlipperyOffroad, Incline,
Trailer
, Rocking Assist or Off: turn
and press the controller.
The menu symbol, text and image show the
selected setting.
The Rocking free program can be selected up
to a speed of 20 km/h.
If you switch off the off road program, the
Comfort drive program is configured auto-
matically.
For further information on the off-road pro-
gram; see the vehicle Operator's Manual.
Displaying vehicle data
i
There may be fewer displays depending
on your vehicle's equipment.
X
Press button Ø.
The vehicle menu is displayed.
X
To select DYNAMIC SELECT: turn and press
the controller.
The Individual Configuration
, Off‐
road Settings, Vehicle Data and
Engine Data
menus appear.
X
Select Vehicle Data.
Updates of the following data are dis-
played:
R
Off-road-/type of road to match the
selected drive program
R
G-Force cross to display longitudinal and
lateral acceleration
R
Accelerator and brake pedal activity
R
Vehicle level setting animation
R
Vehicle level display
R
Activity of the spring struts
R
Wheel angle
R
Overrun mode animation
R
Compass display
R
Longitudinal and latitudinal angle
R
DSR
Daytime or night-time view is shown depend-
ing on the automatic light sensor.
Displaying engine data
i
There may be fewer displays depending
on your vehicle's equipment.
X
Press button Ø.
The vehicle menu is displayed.
X
To select DYNAMIC SELECT: turn and press
the controller.
The Individual Configuration
, Off‐
road Settings, Vehicle Data and
Engine Data
menus appear.
X
Select Engine Data.
The following current data is displayed:
R
Engine output
R
Engine torque
R
Engine oil temperature
R
On-board voltage
Individual configuration setting
options
You can choose from the following settings
for the drive:
C Comfort
S Sport
S+ Sport +
M Manual
E Eco
58
DYNAMIC SELECT
Vehicle functions
To Next Page
Loading...
