Setting the EASY-ENTRY/EXIT feature
This function makes getting in and out of your
vehicle easier.
X
Call up Vehicle Settings (Y page 50).
X
To select Easy Entry/Exit: turn and
press the controller.
The setting element is active.
X
To change the setting: press the controller.
You can find further information on the EASY-
ENTRY/EXIT feature in the vehicle Operator's
Manual.
Activating/deactivating the acoustic
locking confirmation
You can also set an audible signal to confirm
that the vehicle has been locked.
X
Call up Vehicle Settings (Y page 50).
X
To select Acoustic Lock Feedback: turn
and press the controller.
The function switches on or off, depending
on the previous setting.
You can find further information on the lock-
ing feature in the vehicle Operator's Manual.
Activating/deactivating the seat-belt
adjustment function
The Belt Adjustment function adjusts the
driver's and front-passenger seat belt to the
upper body of the occupants.
X
Call up Vehicle Settings (Y page 50).
X
To select Belt Adjustment: turn and
press the controller.
The function switches on or off, depending
on the previous setting.
You can find further information on seat-belt
adjustment in the vehicle Operator's Manual.
Activating/deactivating the auto-
matic folding mirror function
When the Automatic Mirror Folding func-
tion is activated, the exterior mirrors fold in
automatically as soon as you lock the vehicle
from the outside. The exterior mirrors fold out
automatically again as soon as you unlock the
vehicle.
X
Call up Vehicle Settings (Y page 50).
X
To select Automatic Mirror Folding:
turn and press the controller.
The function switches on or off, depending
on the previous setting.
You can find further information on the auto-
matic folding mirror function in the vehicle
Operator's Manual.
Switching locator lighting on/off
If you switch on the Locator Lighting func-
tion, the exterior lighting is switched on for a
short time when it is dark. The light switch
must be set to à (see the vehicle Opera-
tor's Manual).
The exterior lighting remains on for
40 seconds after the vehicle is unlocked.
When you start the engine, the locator light-
ing is switched off and automatic headlamp
mode is activated.
X
Call up Vehicle Settings (Y page 50).
X
To select Locator Lighting: turn and
press the controller.
X
Press the controller.
The function is switched on or off, depend-
ing on the previous status.
You can find further information on the loca-
tor lighting in the vehicle Operator's Manual.
Switching the automatic locking fea-
ture on/off
The vehicle is locked automatically when the
ignition is switched on and the vehicle is trav-
eling faster than walking pace.
Vehicle settings
51
Vehicle functions
Z
To Next Page
Loading...
