OUTBOARD INSTALLATION/ATTACHMENTS - 7A-390-817643R1 DECEMBER 1996
Outboard Mounting Hardware
51509
a
b
c
d
e
a - Mounting Bolts (4)
b - Flat Washers (4)
c - Locknuts (4)
d - Transom Clamp Retainers With Mounting Hardware
e - Shims - Transom Clamp Retainers (If Required)
Fasten outboard to boat transom following installation A or
B shown below.
Installation A
Use for permanent installation.
51462
a
b
a - Tighten Transom Clamp Handles
b - Mounting Bolts (Supplied with Outboard
Installation B
Use for easy removal and installation of outboard.
51462
a
b
c
d
a - Tighten Transom Clamp Handels
b - Part Number 812433-C1
c - Part Number 812432-C1
d - Transom Clamp Retainers (Opitional)
Installation A
Fastening outboard for permanent installation.
Drill four 1/2 in. (12.5mm) holes and fasten outboard to
boat transom.
51489
a
b
c
d
a - Bolts (4)
b - Flat Washers (4)
c - Locknuts (4)
d - Marine Sealer
To Next Page
Loading...
