7A-4 - OUTBOARD INSTALLATION/ATTACHMENTS 90-817643R1 DECEMBER 1996
Installation B
Fastening outboard for easy removal and installation.
Mark hole location.
51393
Drill four 3/8 in. (9.5mm) holes and fasten transom clamp
retainers to transom.
Add shims (if necessary) to allow for a small amount of
clearance between transom clamps and retainers.
51489
a
b
c
d
e
f
g
a - Bolts (4)
b - Flat Washers (4)
c - Locknuts (4)
d - Marine Sealer
e - Transom Clamp Retainers (2)
f - Shims (4)
g - Transom Clamp
Retainers installed.
51394
Outboard can be easily removed and installed.
51395
To Next Page
Loading...
