Page 18
Functional Principle, Technical Data
optoNCDT 1700
optoNCDT 17x0BL
Type ILD 1700-20BL 1700-200BL 1700-500BL 1700-750BL 1710-50BL 1710-1000BL
Measuring range mm 20 200 500 750 50 1000
Start of measuring
range
mm 40 100 200 200 550 1000
Midrange mm 50 200 450 575 575 1500
End of measuring
range
mm 60 300 700 950 600 2000
Linearity FSO
≤ ±0.08 % ≤ ±0.1 % ≤ ±0.08 % ≤ ±0.1 %
Resolution
1
µm 1,5 12 30 50 5 100
Measurement frequency 2.5 kHz; 1.25 kHz; 625 Hz; 312.5 Hz (adjustable)
Light source Semiconductor laser < 1 mW, 405 nm (blue purple)
Laser protection class Class 2 acc. to DIN EN 60825-1: 2015-07
Light spot diameter
(µm)
SMR, µm
MMR, µm
EMR, µm
320
45
320
1300
1300
1300
1500
1500
1500
1500
1500
1500
400 x 500
400 x 500
400 x 500
2.5 ... 5 mm
2.5 ... 5 mm
2.5 ... 5 mm
Housing size S M L
Weight (with 25 cm cable) appr. 550 g appr. 550 g appr. 600 g appr. 600 g appr. 800 g appr. 800 g
The specified data apply to a white, diffuse reflecting surface (Reference: Ceramic).
SMR = Start of measurement range; MMR = Midrange; EMR = End of measuring range
FSO = Full Scale Output
1) At a measurement frequency of 2.5 kHz, without averaging
To Next Page
Loading...