Microhard Systems IPN3G - Page 150

© Microhard Systems Inc. 150
5.0 AT Commands
AT+MPWD
Command Syntax
Used to set or change the ADMIN password for
the IPn3G.
AT+MPWD=<New password>, <confirm
password>
Description
Example
Input:
AT+MPWD=admin,admin<enter>
Response:
OK
AT+MAUTH
Command Syntax
Configure RADIUS authentication on the
IPn3G.
AT+MAUTH=<Mode>, <Radius Server IP>,
<Port>, <Secret>, <Timeout_s>
Mode:
0 Local
1 Radius&Local
Description
Example
Input: (Entering Values)
AT+MAUTH=0,0.0.0.0,1812,nosecret,10 <enter>
Response:
OK
Input: (Retriieving Values)
AT+MAUTH?<enter>
Response:
+MAUTH: Local,"0.0.0.0","1812","nosecret",10
OK
AT+MDISS
Command Syntax
Configure discovery mode service used by
IPn3G and utilities such as “IP Discovery”.
AT+MDISS=<Mode>
Mode:
0 Disable
1 Discoverable
2 Changeable
Description
Example
Input:
AT+MDISS=1 <enter>
Response:
OK
The AT&W command
must be issued to save
changes!