Microhard Systems IPN3G - Page 151

© Microhard Systems Inc. 151
5.0 AT Commands
AT+MNAT
Command Syntax
Enable/Disable NAT
AT+MNAT=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MNAT=1<enter>
Response:
OK
AT+MPPPS
Command Syntax
Enable/Disable PPP
AT+MPPPS=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MPPPS=1 <enter>
Response:
OK
AT+MPIPP
Command Syntax
Enable/Disable IP-Passthrough
AT+MPIPP=<Mode>
Mode:
0 Disable
1 Ethernet
Description
Example
Input:
AT+MPIPP=1 <enter>
Response:
OK
The AT&W command
must be issued to save
changes!