Microhard Systems IPN3G - Page 156

© Microhard Systems Inc. 156
5.0 AT Commands
AT+MDDNSE
Command Syntax
Enable/Disable DDNS.
AT+MDDNSE=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MDDNSE=0<enter>
Response:
OK
AT+MDDNS
Command Syntax
Select DDNS service provider, and login
credentials as required for DDNS services.
AT+MDDNS=<service name>, <domain>,
<user name>, <password>
Service name:
0 - dyndns.org
1 - changeip.com
2 - zoneedit.com
3 - no-ip.com
4 - noip.com
5 - freedns.afraid.org
6 - dnsmax.com
7 - thatip.com
Description
Example
Input:
AT+MDDNS=0,user.dydns.org,user,password <enter>
Response:
OK
The AT&W command
must be issued to save
changes!