Microhard Systems IPN3G - Page 157

© Microhard Systems Inc. 157
5.0 AT Commands
AT+MIKACE
Command Syntax
Enable or Disable IMCP ICMP keep-alive
check.
AT+MIKACE=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MIKACE=1<enter>
Response:
OK
AT+MIKAC
Command Syntax
Set ICMP Keep-alive check parameters.
AT+MIKAC=<host name>, <interval in
seconds>, <count>
Description
Example
Input:
AT+MIKAC=www.google.com,600,10<enter>
Response:
OK
The AT&W command
must be issued to save
changes!