Microhard Systems IPN3G - Page 160

© Microhard Systems Inc. 160
5.0 AT Commands
AT+MCODM
Command Syntax
Set COM1 data mode.
AT+MCODM=<Data Mode>
Data Mode:
0 Seamless
1 Transparent
Description
Example
Input:
AT+MCODM=1<enter>
Response:
OK
AT+MCOCT
Command Syntax
Set COM1 port character timeout.
AT+MCOCT=<timeout_s>
Description
Example
Input:
AT+MCOCT=0 <enter>
Response:
OK
AT+MCOMPS
Command Syntax
Set COM1 maximum packet size.
AT+MCOMPS=<size>
Description
Example
Input:
AT+MCOMPS=1024<enter>
Response:
OK
The AT&W command
must be issued to save
changes!