Microplex LOGIJET T4 - Page 4

4 Contents
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual LOGIJET T4 /T6 /RFID Edition 1.3
Chapter Page
6. Control Panel 46
6.1. Attaching the Printer to a Computer 46
6.2. Turning on the Printer 46
6.3. Control Panel View 47
6.4. Function of the Control Panel Elements 48
6.5. Configuration via the Control Panel 51
6.6. Menu Structure 52
6.7. Syntax of Diagrams 56
7. Panel Functions 57
7.1. Print Process Selecting 57
7.2. Media Setting (Material; Label or Continuous) 59
7.3. Page Length Adjustment 60
7.3.1. Starting the (Printer’s) Measurement of Label Length 61
7.3.2. Configuration of Semiautomatic Label Length Measurement 61
7.4. Material Width Adjustment (Paper Width) 62
7.5. Configuration of Text Margins 63
7.6. Printing the Status Sheet 64
7.7. Printing the Font List 66
7.8. Hexdump-Mode Activation 67
7.9. Normal Print Mode Activation (incl. FORM FEED) 68
7.10. Clearing the Input Buffer (Cancel Job) 69
7.11. Printing the Menu Page 70
7.12. Generating Test Prints (Sliding Pattern) 71
7.13. Data Interface Selection 72
7.14. Emulation Selection 73
7.15. Display Language Selection 75
7.16. Transparent Code Adjustment 76
7.17. Selection of Memory Distribution (Input Buffer) 77
7.18. Setting to Factory Default 78
7.19. Font Selection 79
7.20. Text Orientation Selection 82
7.21. Symbol Code Selection 83
7.22. Print Speed Adjustment 84