Microplex SOLID 50 A3 - 3 - Text Orientation Selection

100 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.22. Text Orientation Selection
This function selects the active text orientation.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
  
[Page Menu ]
[Font Number ]
  
[Orientation ]
[Orientation 0 ]
  
[Orientation 1 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key until
[Page Menu ] is displayed.
Press the NEXT or PREVIOUS key until
[Orientation ] is displayed.
Press the NEXT or PREVIOUS key until
the desired orientation is displayed.
The orientation 1 = landscape is
selected.
In addition this new value can be
saved as setup value (using the
SELECT key), before the printer is
turned ON LINE again.
Text orientation assignment:
Orientation 0 = Portrait (upright format)
Orientation 1 = Landscape (horizontal format)
Orientation 2 = Portrait upside down
Orientation 3 = Landscape upside down