Troubleshooting 147
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
7.5. Print Repeat after an Error
The printer is provided with an automatic jam safety
function to prevent a loss of data.
As a standard all the pages being within the printer when
an error occures will be printed again, no data will get
lost.
The exact number of pages to repeat depends on the
format length and the position where the error occured on
the page.
This automatic jam safety function can be switched off (by
changing the EEPROM - configuration) if the user wants to
resume the print job at a position he chooses himself.
In addition to this see panel function Clearing the Input
Buffer (section 5.6).
To Next Page
Loading...
