Microplex SOLID 50 A3 - 3 - Normal Print Mode Activation

Panel Functions 77
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.5. Normal Print Mode Activation (incl. FORM FEED)
The normal print mode suspends the Hexdump-Mode.
This function is activated, when a print job must be continued
without turning the printer off and on again. In addition to that
the function “Normal Print Mode Activation“ is used to produce
a FORM FEED.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
[Status Sheet ]
  
[Normal Print /FF]
[Normal Print/FF ]
Notes
Turn the printer OFF LINE with this
key.
Menu Level 1 is selected.
Press the NEXT or PREVIOUS key until
[Normal Print/FF ] is displayed.
The normal print mode is activated.
The printer is turned ON LINE again.
Note:
After activating the normal print mode a FORM FEED is released
automatically and one sheet is put out. This is necessary because
after a test in the Hexdump-Mode it is possible that data can
remain in the input buffer unintentionally (cause: in the Hexdump-
Mode no control characters are evaluated and no FORM FEED is
effected).