Microplex SOLID 50 A3 - 3 - Display Language Selection

Panel Functions 93
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.17. Display Language Selection
This function enables the user to determine the language for the
display messages, the status sheet and the font list.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
  
[Configuration ]
[Interface ]
  
[Language ]
[German ]
  
[English ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key
until [Configuration] is displayed.
Press the NEXT or PREVIOUS key
until [Language ] is displayed.
Press the NEXT or PREVIOUS key
until the desired language (e.g.
English) is displayed.
The display language English is
selected.
In addition this new value can be
saved as setup value (using the
SELECT key), before the printer is
turned ON LINE again.