Microplex SOLID 50 A3 - 3 - Print Media Jam Troubleshooting; Avoiding Paper Jams

130 Troubleshooting
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
7.4. Print Media Jam
By carefully selecting print media and loading them properly, you
should be able to avoid most jams. See the following for instructions
on loading print media.
7.4.1. Avoiding Jams
Storing print media
Use the following guidelines to avoid paper feeding problems and
uneven print quality.
 Store print media in an environment where the temperature is
approximately 21°C (70°F) and the relative humidity is 40%.
 Store cartons of paper on a pallet or shelf rather than directly on
the floor.
 If you store individual packages of paper out of the original carton,
make sure they rest on a flat surface so the edges do not buckle or
curl.
 Do not place anything on top of paper packages.