Microplex SOLID 50 A3 - 3 - Printer Installation Requirements

26 Installation
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
2.4. Printer Installation

- The chosen location should be clean, dry and well-ventilated.
- Damaging environmental factors such as metal vapors, oil mist,
corrosive leaches or the like must not affect the printer.
- Place the printer on a horizontal, firm and solid surface.
- The printer environment has to be free of shocks or
vibrations.
- The printer and socket have to be easily accessible.
- The printer should not be located near volatile or combustible
materials (e.g. a curtain).
- To avoid damage, the devices must be switched off (e.g. cut off
from the power supply) before the user begins connecting the
interface lines.
- The printer must be connected to an appropriate AC power
source 120V AC/60 Hz (North America) or 230V/50 Hz
(Europe, United Kingdom e.g.). The power source must be
properly grounded. The socket and power cords must not be
damaged.
- Use the printer only within the allowed fluctuation range of
± 10%.
- The power source must be free of noise, and not subjected to
surges or noise (e.g. generated by big machines).