Microplex SOLID 50 A3 - 3 - Clearing Jams from the Printer

132 Troubleshooting
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
7.4.2. Clearing Jams from the Printer
When a jam occurs, the printer displays a two-line error
message and stops operating.
Example of an error message:
[Paper Jam ! ]
[zzz, Fuser Area ] Location of the paper jam,
in addition a error code is
displayed.
Please regard the following information to remove a paper jam:
 Components inside the printer can be very hot, so please
proceed carefully.
 The jammed material has to be removed very carefully from the
printer.
 The sheets within all paper paths have to be removed
completely.
 Close all printer covers duly.
In fig. 7.4.2.a the paper paths inside a SOLID 50 A3 - 3 printer
are shown including some optional equipments. The current
paper path depends on the selected paper cassette and the
selected output stacker.