Microplex SOLID 50 A3 - 3 - Clearing the Input Buffer (Cancel Job)

78 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.6. Clearing the Input Buffer (Cancel Job)
This function permits the resumption of a print job at a
particular page after a print interruption (e.g. paper jam). The
data contained in the input buffer before the interruption are
cleared.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
[Status Sheet ]
  
[Cancel Job ]
[Cancel Job ]
Notes
Turn the printer OFF LINE with this
key.
Menu Level 1 is selected.
Press the NEXT or PREVIOUS key
until [Cancel Job ] is displayed.
All data contained in the input buffer
will be cleared.
The printer is turned ON LINE
again.