Microplex SOLID 50 A3 - 3 - Changing Paper Size Settings

42 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
3.1.4. Changing the Paper Size Setting
Depending on the print material you use, you may need to change the Paper
Size setting.
The following table shows the paper sizes supported by the paper cassettes:
Cassette /
Feeder
Paper sizes supported
Print media
supported
Capacity
A3
A4
A4R
A5
*1)
A5R
*2)
Ledger
Letter
LetterR
Legal
Multipur-
pose
feeder
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Paper,
transparencies,
labels, card
stock
appr. 100 sheets
of 20 lb paper
1
2
3 and 4
(2 TT)
3 and 4
(Tandem TT)
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Paper,
transparencies
500 Sheets
of 20 lb paper
500+500 Sheets
1200+800 Sheets
*1)
A5 = Long Edge Feed
*2)
A5R = Short Edge Feed

To change the size of the print page (print image) use the
panel function Paper Size Selection (see section 5.12).
Feed
Feed