Microplex SOLID 50 A3 - 3 - Printer Unpacking Procedure

14 Installation
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
2.2. Printer Unpacking
1. Open the cardboard box as shown in the following figure
and remove the top element.
Fig. 2.2.a Opening the cardboard box
CAUTION! The printer weighs approximately 48 kg (106 lbs)
and requires at least two people to lift it safely.
2. Carefully take out the SOLID printer.
Fig. 2.2.b Lifting and transporting the printer safely