Microplex SOLID 50 A3 - 3 - Diagram Syntax Explanation

70 Operation and Menu Structure
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
4.7. Syntax of Diagrams
["Message"]
The control panel functions will be described using diagrams. These
diagrams show the course necessary in order to activate a certain
function.
First the elements of the diagrams are explained:
The sequence on the left describes which keys have to be pressed
briefly in succession.
In this example the START/STOP key has to be pressed first. Then
the START/STOP key has to be released and the NEXT key has to
be pressed. Then the NEXT key has to be released and the SELECT
key has to be pressed.
The Panel display column shows the display messages
corresponding to the sequences listed on the left.
In the column Notes explanations to particular operational steps
are given.