64 Operation and Menu Structure
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
4.5. Configuration via the Control Panel
You can use the control panel to change the printer configuration and
customize your printer to meet your specific needs.
In addition printer configuration via Ethernet is possible.
The MICROPLEX printer controller offers an integrated website, for
more information see Networking Features of MICROPLEX Printers.
Chapter 5 (Panel Functions) describes how to reach the particular
printer functions via the control panel.
T e m p o r a r y changes in printer configuration are effective only as
long as the printer stays turned on. To select such changes temporarily,
the user must terminate the change of function by pressing the SELECT*
key one single time.
P e r m a n e n t changes in printer configuration are active each time
the printer is turned on again. To select such changes permanently, the
user must terminate the change of function by pressing the SELECT*
key two times.
An output of the current printer values can be generated using the
panel function Printing the Status Sheet (see section 5.1).
Please note:
User default settings remain in effect until you save new settings
or restore the factory defaults.
Settings you choose from your software application or printer
driver can also change or override the user default settings you
select from the operator panel.
* As an alternative the key INFO can be used as well.
To Next Page
Loading...
