Microplex SOLID 50 A3 - 3 - Font Selection

Panel Functions 97
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.21. Font Selection
This function selects the active font. Select a font number out of
the list of available fonts.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
  
[Page Menu ]
[Font Number ]
[Font 0600 ]
  
[Font 5507 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key
until [Page Menu ] is displayed.
Press the NEXT or PREVIOUS key
until the desired font number (5507
Langeoog e.g.) is displayed.
The font number 5507 Langeoog is
selected.
In addition this new value can be
saved as setup value (using the
SELECT key), before the printer is
turned ON LINE again.