Microplex SOLID 50 A3 - 3 - Generating Testsheets (Sliding Pattern)

80 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
5.8. Generating Testsheets (Sliding Pattern)
This function generates a series of test prints without sending
data to the printer.
These test prints facilitate error analysis.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
[Status Sheet ]
  
[Sliding Pattern ]
[Sliding Pattern ]
Notes
Turn the printer OFF LINE with this key.
Menu Level 1 is selected.
Press the NEXT or PREVIOUS key until
[Sliding Pattern] is displayed.
A series of test prints is generated.
The printer is turned ON LINE again.

The printing out of test prints can be stopped by pressing the
START/STOP key.