4 Table of Contents
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID 50 A3 - 3 Edition 2.1
Chapter Page
5. Panel Functions 71
5.1. Printing the Status Sheet 71
5.2. Printing the Font List 73
5.3. Choosing Print Resolution 74
5.4. Hexdump-Mode Activation 76
5.5. Normal Print Mode Activation (incl. FORM FEED) 77
5.6. Clearing the Input Buffer (Cancel Job) 78
5.7. Printing the Menu Page 79
5.8. Generating Testsheets (Sliding Pattern) 80
5.9. Feeder (Cassette) Selection 81
5.10. Stacker Selection 83
5.11. Print Mode Selection (Simplex/Duplex) 85
5.12. Paper Size Selection 87
5.13. Enabling Format Check 88
5.14. Print Direction Selection 89
5.15. Data - Interface Configuration 90
5.16. Emulation Selection 91
5.17. Display Language Selection 93
5.18. Transparent Code Adjustment 94
5.19. Selection of Memory Distribution (Input Buffer) 95
5.20. Setting to Factory Default 96
5.21. Font Selection 97
5.22. Text Orientation Selection 100
5.23. Symbol Code Selection 101
5.24. Configuration of Text Margins 102
5.25. Image Shifting to the X-Direction 103
5.26. Image Shifting to the Y-Direction 105
5.27. Lines per Inch Setting (Line Spacing) 107
5.28. Number of Characters per Inch Setting (Character Spacing) 108
5.29. Print Density Setting 109
5.30. Configuration of Network Parameters (IP Address, e.g.) 110
To Next Page
Loading...
